Compatible milling systems:

Compatible Milling Systems - HS
HS Versions
Available thicknesses:
10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm
up to 1443 MPa
PFZ substructures, crowns, copings, long span bridges
  • High flexural strength and low translucency
  • Opaqueness covers abutments perfectly
Available shades:
Available shades Available shades
Available shades
Available shades Available shades
High Strength (HS) zirconia has optimal milling properties and is recommended for porcelain fused to zirconia framework restorations. The material accepts porcelain layering exceptionally well and its low translucency perfectly covers abutments. It comes with an extremly high flexural strength (close to 1500 MPa) and higher fracture toughness for long span bridges and difficult jobs where additional strength is required.
Typical Properties of Sintered Body - HS
Type II. Class 4a (ISO 6872:2015) | *Highest value measured by FKG GmbH Germany | **Measured Vickers Identation

Copyright KeroxDental All Rights Reserved © 2023